List Price: $199.99 Our Price: $129.99 You Save $70.00!

The DISH Pro Plus 44 ( aka DP Plus 44 ) Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, expansion ports to connect additional switches, and a power inserter. Installation Guide..

List Price: $89.99 Our Price: $39.99 You Save $30.00!

Use this device to hook up 4 Dish Network receivers to 3 satellites.

List Price: $69.99 Our Price: $59.99 You Save $10.00!

Use this device to hook up 4 Dish Network receivers to 3 satellite orbital locations. Equivalent to DP34 by Dish Network, but includes a built in off air UHF/VHF/CATV antenna input. DishPro switches may be cascaded 3 switches deep and are DiSEqC Compatible.

List Price: $99.99 Our Price: $39.99 You Save $60.00!

This adapter will allow your legacy receivers to use the new DishPro LNB's. It is required for all DISH Network Receivers; 1000, 2000, 2700, 2800, 3000, 3700, 3800, 3900, 4000, 4700, 4900, 5000, 6000, 7100, 7200 and newer, when used in conjunction with DISHPro LNBFs.

List Price: $27.99 Our Price: $15.99 You Save $12.00!

The DISH Pro Plus Separator is to be used in conjunction with a DISH Pro Plus switch or LNBF to connect the two satellite tuner inputs of a DISH Pro Plus (dual-tuner)

List Price: $39.99 Our Price: $29.99 You Save $10.00!

Use this device to hook up 2 inputs (up to 3 orbital satellite locations) to one receiver.

List Price: $19.99 Our Price: $15.99 You Save $4.00!

• SW21X Satellite Multi-Dish Switch.
• Used for Dish Network and Bell Expressvu.
• Works cascaded with the SW21 to connect 3 dishes and one receiver to pick up signals from 3 SATs at 110 and 119 and 148 or 61.5.
• It can also work alone as a regular SW21 switch.
• Solder-backed
• 950 MHz–2150 MHz
• Compatible with Legacy Systems

List Price: $39.99 Our Price: $25.99 You Save $14.00!

Use this device to hook up 2 inputs (up to 3 orbital satellite locations) to one receiver. The legacy SW21 switch combines two legacy dual LNBF's into one coax line. SW-21 Switch for Dish Networks Dish 500 System or two dish system. Permits voltage switching between 2 satellites. For a dual receiver system 2 of these are required.